Projects

Photos and stories from the field.

Industrial sewer lagoon

The 12 inch line valve and connections that route water through the pump and filter
The 12″ line valve and connections that route water through the pump and filter
Excavating for new piping beside the existing pump area
Excavating for new piping beside the existing pump area
Rebar and forms set for the pump pad
Rebar and forms set for the pump pad
Pouring concrete with a boom pump
Pouring concrete with a boom pump
Fabric laid ahead of gravel and pad work
Fabric laid ahead of gravel and pad work
Aerial view of concrete and pipe work at the new cells
Aerial view of concrete and pipe work at the new cells
New cell with a concrete ramp at the water’s edge
New cell with a concrete ramp at the water’s edge
Completed pump station with self-priming pump
Completed pump station with self-priming pump
Self-priming pump and motor, close up
Self-priming pump and motor, close up

Industrial septic system

Two tanks, a distribution box, and two absorption beds.

This industrial septic system job included two 5,000 gallon septic tanks, a 16-port distribution box, and two absorption beds.

Two 5,000 gallon tanks set in the excavation
Two 5,000 gallon tanks set in the excavation
Tank risers and the distribution box going in
Tank risers and the distribution box going in
Header piping feeding the absorption beds
Header piping feeding the absorption beds
Lateral lines laid on gravel in an absorption bed
Lateral lines laid on gravel in an absorption bed
Site overview with the tanks, distribution box, and absorption beds
Site overview with the tanks, distribution box, and absorption beds
16-port distribution box
16-port distribution box

Lift station rehab

Converting from self-priming pumps to submersible pumps.

This lift station rehab converted the station from self-priming pumps to submersible pumps.

Submersible pumps staged beside the wet well, with the crane ready to set them
Submersible pumps staged beside the wet well, with the crane ready to set them
Inside the wet well: the new discharge piping and guide rails
Inside the wet well: the new discharge piping and guide rails
Confined space entry in the wet well, with forced-air ventilation
Confined space entry in the wet well, with forced-air ventilation
Control panels and conduit at the wet well
Control panels and conduit at the wet well
Inside the pump control panel
Inside the pump control panel

Recent projects

A look at the work. Tap a photo to enlarge.

Insertion valve job: setting a large valve in a deep excavation
Insertion valve job: setting a large valve in a deep excavation
Aerial view of the same insertion valve project
Aerial view of the same insertion valve project
Owner Ben Chambers setting up an insertion valve install
Owner Ben Chambers setting up an insertion valve install
Crew setting an insertion valve in the trench
Crew setting an insertion valve in the trench
Insertion valve cutaway demo model
Insertion valve cutaway demo model
Insertion valve install in the vertical position, setup
Insertion valve install in the vertical position, setup
Insertion valve install in the vertical position, equipment in place
Insertion valve install in the vertical position, equipment in place
Fire hydrant replacement, cutting out the old connection
Fire hydrant replacement, cutting out the old connection
Confined space entry with harness, retrieval line, and forced-air ventilation
Confined space entry with harness, retrieval line, and forced-air ventilation
Cutting 8″ ductile iron pipe in a tight vault with a hydraulic saw. Hydraulic equipment helps keep the air quality manageable.
Cutting 8″ ductile iron pipe in a tight vault with a hydraulic saw. Hydraulic equipment helps keep the air quality manageable.
Pulling a large pump with chain hoists
Pulling a large pump with chain hoists
Crane lift at a remote pump station
Crane lift at a remote pump station
Crane support at a wastewater treatment plant
Crane support at a wastewater treatment plant
Mechanical repair on treatment plant equipment
Mechanical repair on treatment plant equipment
Insertion valve install at a secure industrial facility
Insertion valve install at a secure industrial facility
Overnight repair under work lights
Overnight repair under work lights
Laying sewer line in a deep trench, checking grade with a laser
Laying sewer line in a deep trench, checking grade with a laser
Welding casing sections together
Welding casing sections together
Setting a generator with a rotator wrecker. Power lines kept a conventional crane from working in the area.
Setting a generator with a rotator wrecker. Power lines kept a conventional crane from working in the area.
Chambers Services at an industry training event
Chambers Services at an industry training event

Need help now?

Emergency and short-notice calls welcome. Every job is different, so call us for a quote.

662-312-8165 Chambersservices93@gmail.com